Home / Support / User Manuals / Residential Garages
Residential Garage Shutter User Manual
No new door or motor. Residents enter by LINE, eTag or license plate, and visitors get one-time passes. This manual is for management committees, property staff and residents.
01Plan contents
| A Phone Access | B Hands-Free | C Full Community Management | |
|---|---|---|---|
| Suitable for | Small to mid-sized communities, shop garages | 50+ households, heavy peak traffic | Large communities, office buildings, property companies |
| Includes | Garage controller, resident LINE access, visitor passes, left-open alerts, log export | A + eTag readers or license plate recognition (one each for entry and exit), vehicle list dashboard | B + passing traffic lights, added loop detectors and infrared sensors, camera event snapshots, multi-community property dashboard, annual maintenance |
| Installation | About half a day, garage stays in use | About 1 day | Depends on survey |
02Residents: open via LINE
- The committee issues each household a link code. Residents add the community's LINE Official Account and enter the code.
- Before reaching the garage, press "Open" in the menu → choose the lane → Open. Phone opening requires internet.
- Existing remotes and wall buttons keep working.
03Residents: create visitor passes
- Press "Visitor pass" in the menu and choose the time window and number of uses.
- The system generates a 6-digit code and QR code to forward to visitors, movers or service vehicles.
- Visitors scan the QR code or enter the pass at the garage to get in; it expires automatically outside the time window or when uses run out.
04Residents: eTag and license plate (Plans B and C)
- Use the eTag already on your car or register your plate; the door opens automatically as you approach.
- When you change or sell your car, ask the committee to disable the old credential.
- During power or internet outages, the eTag and plate lists are stored on site so the door still opens.
05Committee: lists and logs
- Maintain unit numbers, residents, plates and eTags in the committee dashboard. Disable residents who move out in one click; the list syncs to the on-site controller and takes effect when the dashboard shows "Synced".
- The vehicle limit per household follows the community's rules.
- Open/close logs (who, when, by what method) are kept for 1 year and can be searched and exported by authorized personnel.
- Doors left open too long, jammed or not closed in time trigger alerts to the committee and property contacts.
06Safety design
- Remote commands are only requests. The controller checks on-site conditions first and will not close the door if any check fails.
- Doors without anti-pinch protection cannot be closed remotely; for older shutters we recommend adding infrared sensors.
- If loop detectors or infrared sensors detect a vehicle or person under the door, it will not close; automatic closing after opening also requires the area to be clear.
- If the door jams or fails to reach position in time, it locks out and only accepts Stop until staff on site confirm it is safe.
- During maintenance, the on-site service switch pauses all remote commands.
- Fire shutters linked to the fire system are not connected.
07How it works
- Book a survey: online form or phone.
- On-site survey: photograph the control box, motor nameplate, safety devices and network location.
- Written quote: includes compatibility notes and scope of work for the committee to decide.
- Installation and testing: original door and motor kept; we test opening, closing, end positions and safety conditions.
- Resident onboarding: notice templates, resident list import and dashboard handover.
08FAQ
Operate manually as before; the controller sends a power-loss alert first. eTag and plates still open the door; LINE opening needs internet, so use your existing remote. Only unit number, license plate, eTag number and LINE account. Logs are kept for one year and can only be viewed and exported by personnel authorized by the committee. No. The controller connects in parallel to the existing control box; original buttons, remotes and limit switches all stay.What about power outages?
What about internet outages?
What resident data is stored?
Do we need to replace our door or motor?
09Repairs and support
Support line +886-2-2697-5818 (Mon to Fri 09:00–12:00, 13:00–17:00, Taiwan time). You can also press "Contact Support" in the menu of the "Smart Store" LINE Official Account (@atsmartstore).
| Item | Details |
|---|---|
| Equipment warranty | 1 year, with optional extended warranty |
| On-site repairs (Taipei & New Taipei) | Standard: on site within 2 business days of a report; Premium: within 1 business day |
| On-site repairs (other areas) | 3 to 5 business days, depending on area |
| Regular inspections | Standard: once a year; Premium: every six months. Covers batteries and power, firmware updates, camera angles and lens cleaning, sensor calibration |
| Basic | LINE support and remote assistance; on-site repairs charged separately |
When reporting a fault, please have ready: store or community name, which device, when it started, and a screenshot. On-site repairs are handled by personnel dispatched by AboutTime. All fees are invoiced by AboutTime; on-site personnel do not accept cash.
Book a Free AssessmentOther plan manuals
Screens and features are subject to the released version; configuration is confirmed by site survey before installation.