Home / Business / Residential Garages
Residential Garage Shutters
No new door or motor. We add a controller next to your existing garage door control box. Residents enter by LINE, eTag or license plate, visitors get one-time passes, and the management committee is alerted the moment the door isn't closed properly.
Available to book, with a free on-site survey
No more uncontrolled remotes
Access is tied to residents and vehicles. Disable residents who move out in one click, with no worries about cloned remotes.
No one needs to come down for visitors
Residents create time- and use-limited passes in LINE, so visitors, movers and service vehicles can drive straight in.
See the door status
Doors left open too long, jammed or not closed in time trigger alerts to the committee and property manager. Access logs can be searched and exported.
First, which type is your garage door?
Garage doors in Taiwanese buildings fall roughly into these types. We confirm on site by photographing the control box and motor nameplate.
- Standard roller shutter
- Steel or aluminum, used in most residential basements. Motor runs on single-phase AC 220V or three-phase 220/380V, 300 to 1000 kg class, opening in about 15 to 30 seconds. Supports phone, eTag and plate opening; remote closing requires a bottom safety edge or infrared sensor.
- DC roller shutter
- 110V control box with a DC 24V motor, common in townhouses and small communities, usually with built-in obstacle reversal. Supports all features; some models need an added end-position sensor.
- High-speed door
- Inverter-driven, opening at about 1 to 1.5 meters per second, common in new developments and office buildings. We connect to the inverter panel's open input and use the existing light curtain as a safety condition.
- Barrier gate
- Electric boom barrier, often paired with an inner shutter. We connect to the raise/lower terminals and read the loop detector, and it can be linked with the shutter.
- Fire shutter
- Doors linked to the fire system stay on their original system and are not remotely controlled.
Specifications reflect common industry ranges; actual details depend on the nameplate, control box and site survey.
Three plans
Pricing depends on door type, number of lanes and on-site network conditions. We provide a written quote after the survey for your management committee to discuss.
A Phone Access
Small to mid-sized communities, shop garages
- Garage controller wired in parallel with the existing control box
- Residents open via LINE
- One-time visitor passes
- Instant alerts for doors left open or jammed
- Exportable open/close logs
B Hands-Free
Communities with 50+ households and heavy peak traffic
- Everything in Plan A
- eTag readers or license plate recognition (one each for entry and exit)
- Vehicle list dashboard; the committee adds and removes vehicles itself
- The list is stored on site, so the door still opens when the internet is down
C Full Community Management
Large communities, office buildings, property management companies
- Everything in Plan B
- Passing traffic lights, plus added loop detectors and infrared sensors
- Camera snapshots matched to access logs
- Multi-community dashboard for property managers, plus annual maintenance
How residents open the door
Open via LINE
Add the community's LINE Official Account and tap to open, with no extra app to download. Visitor passes are created in LINE too.
eTag and license plate recognition
Use the eTag already on your car, or have cameras recognize registered plates, and the door opens as you approach.
Existing remotes still work
Existing remotes and wall buttons keep working, so the committee can phase them out gradually.
Safety design
Remote commands are only requests. The controller checks on-site conditions first and will not close the door if any check fails.
- Doors without anti-pinch protection cannot be closed remotely; for older shutters we recommend adding infrared sensors.
- If loop detectors or infrared sensors detect a vehicle or person under the door, it will not close.
- If the door jams or fails to reach position in time, it locks out and only accepts Stop until staff on site confirm it is safe.
- During maintenance, the on-site service switch pauses all remote commands.
- Fire shutters linked to the fire system are not connected.
How it works
Book a survey
Online form or phone
On-site survey
Photograph the control box, motor nameplate, safety devices and network location
Written quote
Includes compatibility notes and scope of work for the committee to decide
Installation & testing
Original door and motor kept; we test opening, closing, end positions and safety conditions
Resident onboarding
Notice templates, resident list import and dashboard handover
Common questions from management committees
Do we need to replace our existing shutter or motor?
No. The controller connects in parallel to the up, stop and down terminals of the existing control box. Original buttons, remotes and limit switches all stay.
What happens during a power or internet outage?
During a power outage, operate the door manually as before; the controller sends a power-loss alert first. During an internet outage, the eTag and plate lists are stored on site so the door still opens; phone opening requires internet.
How is resident data stored?
We store only unit number, license plate, eTag number and LINE account. Open/close logs are kept for one year and can only be viewed and exported by personnel authorized by the committee.
Does the management committee need to approve it?
The garage is a common area, so we recommend installing after a committee resolution. We provide a solution brief and quotation for the meeting.
Can you also fit high-speed doors and barrier gates?
Yes. High-speed doors connect to the inverter panel and barrier gates to the raise/lower terminals, using the existing light curtain or loop detector as a safety condition.